Step 4: Selecting The Source - Sony DAV-DZ790K Operating Instructions Manual

8
Press C/c to select [START], then
press .
The system outputs a progressive signal for
5 seconds. Check that the screen is
displayed correctly.
9
Press C/c to select [YES], then press
.
The system outputs a progressive signal.
When you select [NO], the system does not
output a progressive signal.
34
GB
Step 4: Selecting the
Source
You can select the playback source.
Press FUNCTION repeatedly until the
desired function appears in the front panel
display.
Each time you press FUNCTION, the function
changes as follows.
"DVD" t "TUNER FM" t "USB" t "TV"
t "SAT/CABLE" t "DMPORT" t
"AUDIO" t ...
Function Source
"DVD" Disc that is played by the
system
"TUNER FM" FM radio (page 64)
"USB" USB device (page 70)
"TV" TV
"SAT/CABLE" Component that is
connected to the SAT/
CABLE jacks on the rear
panel
"DMPORT" DIGITAL MEDIA PORT
adapter (page 82)
"AUDIO" Portable audio source that
is connected to the AUDIO
IN jack on the front panel
FUNCTION