Product Description And Specifications; Assembly; Product Features; Replacing/Inserting The Saw Blade - Bosch PFZ 500 E Original Instructions Manual

OBJ_BUCH-105-003.book Page 11 Friday, August 26, 2011 12:42 PM
Product Description and Specifica-
tions
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.
Intended Use
The machine is intended for sawing wood, plastic, metal and
building materials while resting firmly on the workpiece. It is
suitable for straight cuts. The saw blade recommendations
must be observed.

Product Features

The numbering of the product features refers to the illustra-
tion of the machine on the graphics page.
1 Saw blade*
2 Guide stop
3 Hand guard
4 On/Off switch
5 Lock-off button for On/Off switch
6 Handle (insulated gripping surface)
7 SDS saw blade receptacle
8 Slider for SDS saw blade release
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.
Technical Data
All purpose saw
Article number
Rated power input
Stroke rate at no load n
0
Tool holder
Stroke rate control
Stroke
Cutting depth, max.
– in wood
– in non-alloy steel
– in plastic (max. pipe diameter)
Weight according to
EPTA-Procedure 01/2003
Protection class
The values given are valid for a nominal voltage [U] of 230 V. For differ-
ent voltages and models for specific countries, these values can vary.
Please observe the article number on the type plate of your machine.
The trade names of the individual machines may vary.
Noise/Vibration Information
Measured sound values determined according to EN 60745.
Typically the A-weighted noise levels of the product are:
Sound pressure level 88 dB(A); Sound power level 99 dB(A).
Uncertainty K =3 dB.
Wear hearing protection!
Bosch Power Tools
Vibration total values a
determined according to EN 60745:
Cutting wood: a
The vibration emission level given in this information sheet
has been measured in accordance with a standardised test
given in EN 60745 and may be used to compare one tool with
another. It may be used for a preliminary assessment of expo-
sure.
The declared vibration emission level represents the main ap-
plications of the tool. However if the tool is used for different
applications, with different accessories or poorly maintained,
the vibration emission may differ. This may significantly in-
crease the exposure level over the total working period.
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may sig-
nificantly reduce the exposure level over the total working pe-
riod.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and the
accessories, keep hands warm, organise work patterns.
Declaration of Conformity
We declare under our sole responsibility that the product de-
scribed under "Technical Data" is in conformity with the fol-
lowing standards or standardization documents: EN 60745
according to the provisions of the directives 2011/65/EU,
2004/108/EC, 2006/42/EC.
Technical file (2006/42/EC) at:
Robert Bosch GmbH, PT/ESC,
D-70745 Leinfelden-Echterdingen
Dr. Egbert Schneider
Senior Vice President
PFZ 500 E
Engineering
3 603 C98 0..
W 500
-1
min 0–2700
SDS
Robert Bosch GmbH, Power Tools Division
D-70745 Leinfelden-Echterdingen
25.07.2011
mm 23

Assembly

mm 150
mm 10

Replacing/Inserting the Saw Blade

mm 150
Before any work on the machine itself, pull the mains
plug.
kg 2.0
When mounting the saw blade, wear protective gloves.
/II
Danger of injury when touching the saw blade.
When changing the saw blade, take care that the saw
blade holder is free of material residue, e. g. wood or
metal shavings.
Selecting a Saw Blade
Use only saw blades suitable for the material being worked.
An overview of recommended saw blades can be found at the
end of this manual. Use only saw blades with M-shank.
English | 11
(triax vector sum) and uncertainty K
h
2 2
=14 m/s , K=6 m/s .
h
Dr. Eckerhard Strötgen
Head of Product
Certification
2 609 005 663 | (26.8.11)