Sleep Mode - National Instruments NI 9264 Operating Instructions Manual

Wiring for High-Vibration Applications
If an application is subject to high vibration, National Instruments
recommends that you use the NI 9940 backshell kit to protect the
connections. Refer to Figure 1 for an illustration of the NI 9940
connector backshell.

Sleep Mode

This module supports a low-power sleep mode. Support for sleep
mode at the system level depends on the chassis that the module is
plugged into. Refer to the chassis manual for information about
support for sleep mode. If the chassis supports sleep mode, refer to
the software help for information about enabling sleep mode. Visit
and enter for information about
ni.com/info cseriesdoc
C Series documentation.
Typically, when a system is in sleep mode, you cannot
communicate with the modules. In sleep mode, the system
consumes minimal power and may dissipate less heat than it does
in normal mode. Refer to the Specifications section for more
information about power consumption and thermal dissipation.
© National Instruments Corp. 11 NI 9264 Operating Instructions and Specifications