Samsung SCD-6083R User Manual page 26

camera operation
- FONT COLOR : You can change the OSD font color. (White, Yellow, Green, Red, Blue)
- LANGUAGE : You can select the menu language according to your requirements.
- RETURN : Return to the SPECIAL menu.
COMM ADJ (Communication Adjustment) :
-
COAX : You can select whether to
use COAX communication.
- RETURN : Return to the SPECIAL
menu.
IMAGE ADJ
❶
If the SPECIAL menu screen is
displayed, use the Function Setup
switch so that the arrow indicates
'IMAGE ADJ'.
❷
Select a desired mode using the
Function Setup switch.
- GAMMA :
The setting range is 0.35~1.0 .
The closer to 1.0 the setting is, the
darker it gets. default value is User,
User is the optimum setting.
- PED LEVEL : The setting range is 1 ~ 100. The closer to 100 the setting is, the higher
- COLOR GAIN : The setting range is 1 ~ 100. The smaller the setting value is the
- H-REV : Flip an image horizontally.
- V-REV : Flip an image vertically.
- SHARPNESS : Select a mode to adjust the thickness of an image's sharpness.
OFF : Released state
ON : The setting range is 1 ~ 32.
- RETURN : Return to the SPECIAL menu.
M

When the V-REV or H-REV mode is enabled, the text on the screen does not flip.

If you increase the SHARPNESS level too high, the picture may become distorted or noise may appear.
26_ camera operation
the PED level gets.
smaller the color gain gets and the more color blind it gets.
Depending on the image, adjust it to an appropriate value.
COMM SETUP
1. COAX
2. RETURN
IMAGE SETUP
GAMMA
1.
PED LEVEL
2.
COLOR GAIN
3.
4. H-REV
5. V-REV
6. SHARPNESS
RETURN
7.
ON
USER
I
IIIIIIIIIIIIIIIIIIII 1
I
50
IIIIIIIIII IIIIIIIIII
OFF
OFF
ON