Quality of Service (QoS) Algorithms
NOTE: It is possible for the statistics display for a Backup to show "Master" in the state field even when you have
not yet configured another VRRP router. When you activate a Backup, if the Backup's Dead interval expires
before the Backup hears from another VRRP router, the Backup becomes the Master.
Figure 8
VRRP interface statistics
This panel shows a row for each interface on the router.
Clearing VRRP Statistics
Use the following methods to clear VRRP statistics.
USING THE CLI
To clear VRRP statistics information for a router, enter the following command:
Router1(config)# clear ip vrrp-stat
USING THE CLI
To clear VRRP statistics information for a router:
1.
Select Clear from the System configuration sheet.
2.
Select VRRP.
3.
Select Apply.
Quality of Service (QoS) Algorithms
This section describes the Quality-of-Service (QoS) algorithms used by the HP 9300M routing switches. You can
apply QoS priorities to the following:
•
Ports
•
VLANs
•
Static MAC entries
•
Layer 4 sessions
•
AppleTalk sockets.
22