Network Deployment; General Connection (Without Poe) - Vivotek IP8330 Quick Installation Manual

4

Network Deployment

General Connection (without PoE)

1. If you have external devices such as
sensors and alarms, make the connection
from general I/O terminal block.
GND : Ground
GND
D I
DI
AC24V AC24V: 24V
AC24V
AC24V: 24V
: Digital Input
2. Use the supplied RJ45 female/female
coupler to connect the Network Camera
to a switch.
Use Category 5 Cross Cable when
Network Camera is directly connected to
PC.
3. Connect the power cable from the
Network Camera to a power outlet.
EN-5