Panasonic SA-XR70 Operating Instructions Manual page 25

^
8
Multi control audio settings
Enter Multi
1
control.
MULTI CONTROL
PUSH ENTER
Main menu is displayed.
(Multi control menus and
factory settings á back cover)
Change the
2
settings.
• To select
Turn to
INPUT SELECTOR
change.
Press to
enter.
• To cancel
MULTI CONTROL
PUSH ENTER
To finish settings
1. Press [MULTI CONTROL]
several times to select
"EXIT".
2. Press [INPUT SELECTOR].
SPEAKERS
A B BI-AMP
BI-WIRE
6.1CH DECODING
VCR 2
VIDEO IN L AUDIO IN R
S-VIDEO IN
MULTI CONTROL
Tone
You can adjust the level of the
bass and treble.
• The STEREO mode must be on
and input must be either
analogue or 2-channel PCM
signals. You cannot adjust the
tone if DVD ANALOG 6CH is
selected.
Balance
You can adjust the balance of the
front speakers.
Second audio output
Select the source to output from
SECOND AUDIO OUT.
DISABLE: For use as the regular
TAPE REC (OUT).
ENABLE: For use as
SECOND AUDIO OUT.
When "SOURCE" is selected, the
source being played by this unit is
output.
To listen to the radio, select
SOURCE and tune to the station.
Dual program
When the input signal is Dolby
Digital and "DUAL" appears in the
display, the audio to be output is
set.
MAIN:Main audio output
SAP:Sub channel audio output
MAIN+SAP:Main and sub channel
audio output
Dynamic range
compression
Change this setting to listen to
software recorded with Dolby
Digital at low volume (such as late
at night) maintaining audio clarity.
It reduces the peak level in loud
scenes without affecting the sound
field.
A/D attenuator
Turn the A/D attenuator on if
"OVERFLOW" lights frequently
when using 2-channel analogue
input or DVD ANALOG 6CH input.
INPUT SELECTOR VOLUME
MULTI CONTROL
PUSH ENTER
DOWN UP
PHONES
1. Select. 2. Select.
INPUT SELECTOR
TONE
1. Select. 2. Adjust the balance.
INPUT SELECTOR
BALANCE
1. Select. 2. Select.
INPUT SELECTOR
OPTION
the
4. Select.
INPUT SELECTOR
SOURCE
SOURCE, CD, TV, DVD,
DVR/VCR1, VCR 2, TAPE
1. Select. 2. Select.
INPUT SELECTOR
OPTION
1. Select. 2. Select.
INPUT SELECTOR
OPTION
OFF: The software is played with the original dynamic range.
STANDARD: The level recommended by the producer of the software for
household viewing.
MAX: The maximum allowable compression (recommended for night viewing).
1. Select. 2. Select.
INPUT SELECTOR
OPTION
INPUT SELECTOR
MULTI CONTROL
PUSH ENTER
3. Adjust the level.
INPUT SELECTOR
BASS
BASS TREBLE
-10 dB
INPUT SELECTOR
L R
3. Select.
INPUT SELECTOR
SECOND-A
ENABLE
DISABLE
3. Select.
INPUT SELECTOR
DUAL PRG
MAIN, SAP, MAIN+SAP
3. Select.
INPUT SELECTOR
DR COMP
OFF, STANDARD, MAX
3. Select.
INPUT SELECTOR
A/D ATT
OFF
INPUT SELECTOR
0dB
+10 dB
INPUT SELECTOR
ENABLE
INPUT SELECTOR
MAIN
INPUT SELECTOR
OFF
INPUT SELECTOR
OFF
25
ON