Laser Measuring Tool Description; Battery Installation / Removal; Battery Safety; Recycling - Stanley TLM99 User Manual

CAUTION
Indicates a potentially hazardous situation or an unintended use which, if not avoided,
may result in minor injury and/or appreciable material, financial and environmental
damage.
Important paragraphs which must be adhered to in practice as they enable the product
to be used in a technically correct and efficient manner.

BATTERY SAFETY

WARNING: Batteries can explode or leak and can cause injury or fire. To reduce this
risk:
ALWAYS follow all instructions and warnings on the battery label and package.
DO NOT short any battery terminals.
DO NOT charge alkaline batteries.
DO NOT mix old and new batteries. Replace all of them at the same time
with new batteries of the same brand and type.
DO NOT mix battery chemistries.
DO NOT dispose of batteries in fire.
ALWAYS keep batteries out of reach of children.
ALWAYS remove batteries if the device will not be used for several months.
NOTE: Ensure that the correct batteries as recommended are used.
NOTE: Ensure the batteries are inserted in the correct manner, with the correct polarity.

Laser Measuring Tool Description

1. Laser Beam Window
2. LCD display
3. Keypad
4. Warning & Safety Label
5. Battery Compartment
1
5
2
3
4
Fig. A

RECYCLING

DO NOT dispose of this product with household waste.
ALWAYS dispose of batteries per local code.
PLEASE RECYCLE in line with local provisions for the collection and
disposal of electrical and electronic waste under the WEEE Directive.
DECLARATION OF CONFORMITY
Stanley Tools declares that the CE Mark has been applied to this product in
accordance with the CE Marking Directive 93/68/EEC.
This product conforms to IEC 60825-1:2014.
For further details please refer to:
www.stanleytools.eu
www.stanleytools.com
PRODUCT OVERVIEW
Figure A - Laser Measurer Tool
Figure B - Battery Installation
Figure C - TLM99 keypad
Figure D - TLM99 LCD Display
Figure E - TLM99s/TLM99si keypad
Figure F - TLM99s/TLM99si LCD Display

Battery Installation / Removal

Fig. B Use Alkaline AA (LR6) Batteries.
1
2
3