Advertisement
2
Digital 328 Setup
Digital 328 Setup
Digital 328 Setup
Digital 328 Setup
Wordclock
Wordclock
Wordclock
Wordclock
In a configuration using one or two DTRS machines, the 328 must be made to be the Wordclock
Master device. Enter the 328 Menu pages by pressing the <MENU> button on the right hand
side of the LCD display. Using the encoder beneath the display, scroll up or down until the 'Clock
Source Sel' menu is highlighted, and press <ENTER>. Here, either the internal sampling rate
can be toggled between 44.1kHz and 48kHz, depending on which is required. Use the encoder
to toggle the clock rate, press <ENTER> to set the sample rate and <MENU> to return to the
menu pages.
<Wordclock Src.>
Internal:44.1kHz
Tape Ports
Tape Ports
Tape Ports
Tape Ports
To ensure that the Digital 328 Tape Port A is set to TDIF, enter the 328 Menu pages by pressing
the <MENU> button on the right hand side of the LCD display. Using the encoder beneath the
display, scroll up or down until the 'Tape Port Select' menu is highlighted. Press <ENTER> and
keep pressing the Up cursor arrow until the '<Tape Ch17-24 >' menu page is displayed. Using
the encoder, set the Bank Source to TDIF. Press the Down cursor arrow once, to set the
wordlength. The Wordlength required for all DA machines is 16 bit. The wordlength is set on
the 328 with the encoder. Press <ENTER> to set the wordlength and <MENU> to return to
the menu pages.
MIDI
MIDI
MIDI
MIDI
To configure the 328 to send the MMC controls to the DTRS and vice versa, the DTRS option
must be selected in the Tape Machine Setup menu. Enter the Menu pages by pressing the
<MENU> button, and scroll up or down with the encoder until the 'Tape Mach Setup' menu is
highlighted. Press <ENTER>, scroll until 'Tascam DTRS' is highlighted and press <ENTER>
again.
4
or
<Tape Ch17->24 >
Bank Source:TDIF
<Tape Ch17->24 >
Wordlength:
Spirit Digital 328 v2
<Wordclock Src.>
Internal:48.0kHz
16
Advertisement
