Cisco rv 120w Quick Start Manual page 11

Wireless-n vpn firewall
Hide thumbs Also See for rv 120w:
Table of Contents

Advertisement

Better Security (WPA)
Wireless security that uses a password (security key) to protect
your network. It is less secure than WPA2, but it is supported by
older devices. If the devices you are connecting to your wireless
network do not support WPA2, choose this option.
a.
Enter a security key (must be at least 8 and no more than 63
characters) or use the randomly-generated one provided by
the Cisco RV 120W. Keys should contain a mix of letters (both
upper- and lowercase), numbers, and symbols. Security key
ratings are shown to the right of the key and are rated from
weak to secure. Cisco recommends using a key rated as
secure.
b. Click Next.
No Security
This option is not recommended; it allows devices to connect to
your wireless network if the network name is known.
a.
Click Next.
b. Click Yes when the warning message is displayed.
The security settings for your network are shown. To save these
S
4
TEP
settings in a text file on your PC, check the box provided. To print,
click Print these settings. Click Next to confirm these settings. (If
you chose to save these settings to your desktop, then click OK.)
You must enter this security information on each device that
N
OTE
connects to your network. Save this information!
The Cisco RV 120W configures your router and displays a status
S
5
TEP
message if the configuration is successful. Click Next.
The Cisco RV 120W displays a message if it has been configured
S
6
TEP
and is successfully connected to the Internet. Click Finish.
Manually Connecting Your System
Use these procedures if you do not want to use the Setup Wizard.
You must connect one PC with an Ethernet cable for the purpose
N
OTE
of the initial configuration. After you complete the initial configuration,
administrative tasks can be performed using a wireless connection.
Connect your equipment as described in
S
1
TEP
Hardware" section on page
Connect to the configuration utility to view and configure your
S
2
TEP
Cisco RV 120W settings. When you connect to the configuration
Cisco Small Business RV 120W Quick Start Guide
"Connecting Your
6.
11

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents