Table of Contents
Advertisement
PARTS NAMES
8
7
5
6
5
Lens mount cap
The cap is installed to protect the lens mount section.
Remove the lens mount cap before installing a lens (sold separately).
6
Flange-back adjustment screw (FLANGE BACK ADJ.)
7
Flange-back lock screw (FLANGE BACK LOCK)
8
Camera mounting bracket
This bracket can be installed to either the top or bottom of the camera as desired. When changing the position
of the camera mounting bracket, you should always reuse the screws that have been removed.
NOTE: If using a camera mounting bracket (sold separately), select a location that is strong enough to bear
the full weight of the camera and the mounting bracket for long periods, and install the camera and
mounting bracket securely.
4
English
Advertisement
Table of Contents
