How To Write Data To Internal Memory; Self-Diagnosis Function - Sony DSC-HX9V Service Manual

1-4. HOW TO WRITE DATA TO INTERNAL MEMORY

Usually, the camera has been set so as to disable the data writing from the PC to the internal memory of the camera.
This setting must be changed temporarily when the data is to be written to the internal memory such as a case after the board replacement.
To change settings is enabled with using the writing enabler tool (Write Enable Tool) on the Adjust Manual is activating from the Adjust Station.
Data writing method
1) Start the Adjust Manual from the Adjust Station.
2) Click (Write Enable Tool) button.
3) Click "Activate Write Enable Mode" button.
4) Upon completion of the setting change, the following message will be displayed.
5) Return the driver to the original one, and connect the PC to the camera (USB mode: Mass Storage).
6) Write the data read out into the PC to the internal memory of the camera.
7) Disconnect the PC from the camera, and turn off the camera.
Note: By turning off the camera, the write enable setting is reset.
DSC-HX9/HX9V_L2

1-5. SELF-DIAGNOSIS FUNCTION

1-5-1. Self-diagnosis Function
When problems occur while the unit is operating, the self-diagnosis func-
tion starts working, and displays on the LCD screen what to do.
Details of the self-diagnosis functions are provided in the Instruction
manual.
LCD screen LCD screen
Blinks at 3.2 Hz Blinks at 3.2 Hz
C C 3 2 3 2 0 0 0 0
Repaired by: Repaired by: Block Block
C : Corrected by customer C : Corrected by customer
Indicates the appropriate Indicates the appropriate
E : Corrected by service E : Corrected by service step to be taken. step to be taken.
engineer engineer E.g. E.g.
13 ....Format the "memory card". 13 ....Format the "memory card".
32 ....Turn on power again. 32 ....Turn on power again.
1-2
1-5-2. Self-diagnosis Display
When problems occur while the unit is operating, the LCD screen shows
a 4-digit display consisting of an alphabet and numbers, which blinks at
3.2 Hz. This 5-character display indicates the "repaired by:", "block" in
which the problem occurred, and "detailed code" of the problem.
Detailed Code Detailed Code
Refer to "1-5-3. Self-diagnosis Code Table". Refer to "1-5-3. Self-diagnosis Code Table".
– ENGLISH –