Quick Guide - TrekStor Liro Color Quick Manual

QuIcK guIde

b
Thank you for buying the TrekStor Liro Color. We are confident that this product will be the
source of much enjoyment. Please read the following instructions carefully so that you can
become acquainted with the functions of this product and its use.
Current product information and a detailed manual can be found at the TrekStor Website
www.trekstor.de.
Package contents
• TrekStor Liro Color
• micro-USB cable
• Stereo headphones
• Quick guide
1) Controls and connections of the TrekStor Liro Color
1
5 6 7
en
10
2
3
4
10
11
8 9
1) button: A longer push of that button
/
(approx. 3 seconds) switches the device on.
After switching the device on it may take
some time, until the operating system is
ready. To switch off, press the button again
for approx. 3 seconds and the shut down
menu opens. Here you have the choice to
either switch the device off, to put it into
the standby mode or to cancel the process
again. A short press onto the button turns
the display off respective on again (e. g.
when the device is in the standby mode).
2) button: Closes a menu or terminates
M
the display of a file and returns to the file
selection.
3) button: Scrolls back one page in the
O
reading mode, if the flip effect is activated.
4) button: Scrolls forward one page in the
P
reading mode, if the flip effect is activated.
5) Status LED: A red light indicates, that
the device is just being loaded. The light
appears blue, as soon as the battery is fully
loaded.
6) micro-USB connection: Is used for
exchanging data with a computer and
loading the integrated battery.
7) microSD/microSDHC card slot: For inserting
a microSD/microSDHC memory card.
8) Volume control: To increase
the volume.
;
9) 3.5 mm earphone jack
10) RESET: Pressing that button (preferably with
an unfolded paperclip) performs a reset.
This may be necessary in rare cases when
the Liro Color no longer responds to other
keystrokes.
11) Loud speaker
/ decrease
,