Mirror Assy Removal - Sanyo PLC-WTC500L Service Manual

Optical Parts Disassembly

5-1. Mirror Assy removal

1. Remove 4 screws-A (T3x10) and take the Mirror Cover off.
2. Remove 3 screws-B (M3x18) and pull the Mirror Assy upward.
Note: Turn the mirror holder counterclockwise with a flat screw driver if the
screw is behind a mirror holder.
Mirror cover
Mirror assy
A
B
5-2. Mirror removal
1. Pull out the 2 mirror stoppers and remove the Mirror.
Mirror
-42-
Screw-B
Stoppers
Mirror holder