Finishing - Napoleon GDS25N GDS25P Installation And Operation Instructions Manual

GLASS DOOR INSTALLATION
AND REMOVAL
1. Lift the top cast piece off of the unit.
2. Detach the front cast piece from the side pieces by re-
moving the screws from the brackets located in the upper
inside corners.
3. Slide the front straight up to remove.
3
DOOR
SWITCH FUNCTIONS
FAN
CONTROL

FINISHING

2
LATCHES
FIGURE 30
MAIN
ACCENT
BURNER
LIGHT
SWITCH
SWITCH
CAST FRONT INSTALLATION
AND REMOVAL
1. Lift the top cast piece off of the unit.
2. Unlatch the door latches from the door.
3. Slide the door straight up to remove.
3
FRONT
FIGURE 31
Follow the above steps in reverse in order to reinstall
the door. Ensure that the bottom of the door meets the
door retainer before closing the latches.
Follow the above steps in reverse in order to reinstall
the cast front. Ensure that the tabs on the underside of
the front fi t behind the front legs.
Note: It is not necessary to remove the cast front, in order
to remove the door.
FIGURE 32
FRONT
TAB
DOOR
RETAINER
FRONT
LEGS
19
2
SCREWS
BRACKET
W415-0547 / B / 05.08.06