0
. Attach screw and spacer as illustrated in Fig. 46 to the
bottom of both sides of the front housing.
SCREW
&
SPACER
figure 46
. Attach the face plate bracket provided to the top edge
of the front housing using #8 - /" truss head screws as
illustrated in Fig. 47.
figure 47
W45-0536 / C / 09.06.06
AFK / WI FACE KIT INSTALLATION
figure 48
3. Lift and hook the faceplate over the spacers. Then
push the top of the faceplate back until it comes in contact
with the face plate bracket, then secure on the underside
by using the /4-0 screws provided as illustrated in Fig.
49.
NOTE: A 1/4" gap must be maintained between
the front and all finishing material due to regular
removal.
figure 49