Table of Contents
Advertisement
Controls and starting a wash - CE models
Programme
selector
To select and start a wash programme
Make sure that the dishwasher is powered on
1
Press
until the indicator of the desired programme lights up.
2
Press
to start the programme.
3
After 5 seconds, the selected programme indicator will start flashing, the dishwasher will
beep once and the wash will start automatically.
The display will show the approximate time remaining.
Note: the dishwasher will remember the last programme used.
To pause and restart a wash programme
Press
to pause the programme.
1
Open the door very slowly.
2
Important!
There is a risk of being sprayed with hot water. Do not fully open the door until the spray arms have stopped
rotating.
Load, remove, or rearrange any dishes if needed.
3
Check that there is no excessive steam, then close the door.
4
Important!
If the programme is paused when the dishwasher has already heated the water, leave the door ajar for
several minutes before closing it again; if you don't, the expanding steam inside could force the door open.
Press
to restart the programme.
5
heavy normal normal
eco
Programme
indicators
fast
delicate
rinse
.
17
Start/Pause
Hide quick links:
Advertisement
Table of Contents
