View Exercise Record During Cycling - Oregon Scientific SE900 User Manual

VIEW EXERCISE RECORD DURING CYCLING

You could start cycling by following the steps below, and if you set up the Interval, the distance or timer will count down.
NOTE Make sure the watch has enough memory, otherwise no memory displays when you press button after CYCLING mode.
To view cycling records:
1. In CYCLING mode, press top (1) button to enter, and the paired sensor icons display on the screen. Press bottom (3) button to skip the searching mode if the sensor is added.
2. Press top (1) button to enter start mode. Counting starts while
3. Press middle (2) button. You can see total distance (km) /speed (km/h), cadence counting (rpm), calories counting (Cal) and time screen display.
If Auto lap is set, the lap and time counting data automatically display on the screen when they reach the setting.
•
OR
If Manual lap is set, press bottom (3) button to manually set for a lap.
•
OR
While viewing the screen and pressing top (1) button to pause the counting, stops flashing, then press top (1) button to select continue counting or press bottom (3) button
to stop counting. If you press bottom (3) button to stop counting, the CYCLING mode screen displays.
NOTE If you set the watch to automatically toggle screens, the last five screens automatically toggle to display every 5 seconds. Please see
SET USER PROFILE for turning on the toggle feature.
NOTE If you turn on HR zone, the watch displays Above Zone for 3 seconds when your particular heart rate is above the zone;
or displays Below Zone for 3 seconds when your particular heart rate is below the zone.
NOTE If the total number of laps and records reaches the 100th or the total hours of the exercise reaches 80 hours, memory full displays on
the screen with a long beep. You need to clear the memory for further exercise purpose.
NOTE Bike pod low batt. displays on the screen if the watch estimates the bike pod is low battery.
VIEW EXERCISE RECORD AFTER CYCLING
You could view record after cycling on the watch by following the below steps.
To view exercise records:
1. In CYCLING mode, press bottom (3) button to enter cycling memory (mem). The screen displays the latest exercise date and time. Toggle middle (2) button to select
the desired one, then press top (1) button to enter.
NOTE If you want to clear all the memory, toggle middle (2) button until Clear all displays. Press top (1) button to enter, then press top (1) button again to select yes
to confirm deletion of the memory; or press bottom (3) button to select no to go back to the record screen.
2. Press top (1) button to enter View Summary screen. Press top (1) button again to start viewing, then toggle middle (2) button to view the records.
OR
Press bottom (3) button to exit.
3. Press middle (2) button to enter View Lap screen. Press top (1) button to view Lap 1.
4. Press top (1) button again to start viewing, then toggle middle (2) button to view the records.
5. Toggle middle (2) button to view your desired lap. Follow the above step 4.
OR
Press bottom (3) button to exit.
flashes. Heart rate reading with icon (
3
) and exercise time counting (00'00'00) display.