Accessories; Troubleshooting - Husky H100FS Operator's Manual

To order parts and maintenance kits, call 1-866-340-3912.
Overhaul Kit ......................................................................................................................................................079065001255
Driver Maintenance Kit .....................................................................................................................................079065001256
Driver Assembly Kit ..........................................................................................................................................079065001257
Oil and Wrench Kit............................................................................................................................................079065001254
WARNING:
Current attachments and accessories available for use with this tool are listed above. Do not use any attachments or
accessories not recommended by the manufacturer of this tool. The use of attachments or accessories not recommended
can result in serious personal injury.
PROBLEM
Air leak near the top of the tool or
in the trigger area
Air leak near the bottom of the
tool
Tool does nothing or operates
sluggishly
Tool jams frequently

ACCESSORIES

TROUBLESHOOTING

POSSIBLE CAUSE
Loose screws
Worn or damaged O-rings or seals
Loose screws
Worn or damaged O-rings or bumper
Inadequate air supply
Inadequate lubrication
Worn or damaged O-rings or bumper
Incorrect fasteners
Damaged fasteners
Loose magazine
Dirty magazine
Worn or damaged driver
14 – English
SOLUTION
Tighten screws
Install Overhaul Kit
Tighten screws
Install Overhaul Kit
Verify adequate air supply
Lubricate tool
Install Overhaul Kit
Verify that fasteners are the correct size
Replace fasteners
Tighten screws
Clean magazine
Install Driver Maintenance Kit