A Helmet That Can Change Its Use - Shark Evo-One Owner's Manual

a helmet that can change its Use

1/ PUtting on the helmet
For proper fitting, position the chin guard
while in the Jet configuration (i.e. open),
then grip it at the level of the chin straps
in moving the straps slightly apart to faci-
litate sliding over the head. While carrying
out this movement, you are advised to keep
the two sections of the chin strap apart
with your thumbs so that they are properly
positioned.
Position the protective parts of the chin
strap buckle correctly and fasten it in
ac¬cordance with the recommendations
that are appropriate to the versions and
country.
Check that the tension and therefore the
positioning of the helmet are correct for all
positions.
2/ remoVing the helmet
Release the chin strap ; hold the two sec-
tions slightly apart as for putting the helmet
on and remove the helmet.
Warning! NEVER move the chin
guard to change from a full face to
an open face helmet, or vice versa, while
in motion on your motorcycle. You can
loose control of your motorcycle, resulting
in an accident, personal injury or death.
8
a helmet that can change
its Use
The Evo-One is an helmet that can truly
change its use; it enables you to have an
integral helmet that provides you with all
aspects of protection, safety and a water-
proof visor while being able to change to
the Jet position with a chin section that fits
in perfectly with the profile of the helmet. In
this configuration, the chin section causes
no aerodynamic problems and no instability
of weight, and when in the Jet position it
passes all the approval tests, in particular
the test of rotating acceleration.
Even though it is easy to effect the move-
ment, we advise that you transform your
helmet from the Integral to the Jet position
or vice versa only when you are stationary.
Warning!
properly fasten your chin strap or
obtain the correct fit of your helmet on
your head, DO NOT USE THE HELMET! See
your retailer for assistance.
If you cannot