Tenda 4G301 User Manual page 59

Configuration Procedures:
Click Add to add a filter rule.
Filter Mode: Select Deny.
Description: Briefly describe the current rule. This field is optional.
IP: Enter a starting IP address. Here in this example, enter 192.168.2.110. Enter an ending IP
address. Here in this example, enter 192.168.2.111.
WAN Port Range: Enter a service port number. Here in this example, enter 80 (HTTP (port
80) is the standard protocol for web servers.).
Traffic Type: Select a protocol for the traffic. If you are unsure, select Both.
Time: Specify a time period for the current rule to take effect. Here in this example, select
8:00~18:00.
Day: Select a day, or several days of the week for the current rule to take effect. Here in this
example, select Mon, Tue, Wed, Thur and Fri.
Click Save to save your settings.
Enable Client Filter: Check to enable or uncheck to disable the client filter feature.
Select Allow from the Default drop-down list and then click Save.
49
III Features & Configurations