Siemens Gigaset SL78H Manual page 54

Please note
u
If the USB data cable is plugged in, a
Bluetooth connection cannot be
established.
u
If the enclosed USB data cable is
plugged in during an existing Blue-
tooth connection, the Bluetooth con-
nection is cancelled.
Transfer data
You can
u
synchronise your handset directory with
Outlook,
u
download CLIP pictures (.bmp) from the
computer to the handset,
u
download pictures (.bmp) as a screen-
saver from the computer to the handset
u
download sounds (ring tones) from the
computer to the handset.
During the transfer of data between handset
and PC, you will see Data transfer in
progress on the display. During this time the
keypad is disabled, and incoming calls will
be ignored.
Completing a firmware update
¤
Connect your telephone and PC using
the USB data cable (
plied.
¤
Start the "Gigaset QuickSync" program
on the PC.
¤
Set up the connection to the handset.
¤
Open the [Device] tab via
¢
[Settings] [Device properties]
¤
Click on [Firmware update]
The firmware update starts.
The update procedure can take up to
10 minutes (excluding download time). Do
not interrupt the procedure. Do not
remove the USB data cable.
Data is first loaded from the update server
via the Internet. The time required for this
depends on the speed of your Internet con-
nection.
¢
page 14) sup-
Additional functions via the PC interface
Your telephone display is switched off, and
the messages key f and the speaker key
d flash.
Once the update is complete, your tele-
phone automatically restarts.
Procedure in the event of an error
If the update procedure fails or your phone
does not work properly following the
update, repeat the update procedure as fol-
lows:
¤
Close the "Gigaset QuickSync" program
on the PC.
¤
Remove the USB data cable from the tel-
ephone.
¤
Remove the battery (
¤
Replace the battery.
¤
Complete the firmware update as
described.
If the update procedure fails several times or
you can no longer connect to the PC, pro-
ceed as follows:
¤
Close the "Gigaset QuickSync" program
on the PC.
¤
Remove the USB data cable from the tel-
ephone.
¤
Remove the battery (
¤
Press and hold keys 4 and L with
the index and middle finger.
¤
Replace the battery.
¤
Release keys 4 and L. The mes-
sage key f and the speaker key d
will flash alternately.
¤
Complete the firmware update as
described.
¢
page 9).
¢
page 9).
53