Cannondale Kinneto E-Series Owners Manul page 28

User's manual
UM-70H0A-001-00
Turning the battery-powered light ON or OFF
When the battery-powered light is connected,
pressing the Assist-X for 2 seconds displays this
information instead of the clock and assist mode. The
light turns on and off each time it is displayed. It is
displayed for about 2 seconds.
The light turns on and off in conjunction with the battery
power.
When the battery power is off, the light is off.
Clearing the traveling distance
When the light is not connected, you can clear the traveling distance in the main screen. If the battery-powered light is
connected and configured, clear the traveling distance (DST) according to "Clear settings (Clear)" in "Changing the
settings".
1.
Change the traveling data display to DST and press
the Assist-X for 2 seconds.
2.
Release the finger when the DST indication starts
blinking.
In this state, pressing the Assist-X again clears the
traveling distance.
• The DST indicator light stops blinking and the screen
takes you back to the basic screen after leaving it alone
for 5 seconds.
• When the traveling distance is cleared, TIME, AVG, and
MAX are also cleared.
Assist
2 Sec.
When the light is
turned on
Assist
2 Sec.
27
22
E6000 Series
English
Shift
When the light is
turned off
Shift