PROCEDURE FOR RETURNING TO
SERVICE
Clean the entire motorcycle.
Reinstall the battery.
NOTE: Be sure to connect the posi-
tive terminal first, then connect the
negative terminal.
Remove the spark plugs. Turn the
engine a few times by putting the
transmission in top gear and turn-
ing the rear wheel. Reinstall the
spark plugs.
Drain the engine oil thoroughly.
Replace the oil filter with a new
one and pour fresh oil as outlined
in this manual.
Adjust the pressure of tires as
described in the TIRES section.
Lubricate all places as instructed
in this manual.
Do the "Inspection Before Riding"
as listed in this manual.