TURN SIGNAL LIGHT
To replace the turn signal light bull
follow these directions.
1. Remove screw and take off th
lens.
2.
Push in on the bulb, twisting it t~
the left, and pull it out.
I
CAUTION
Overtightening the screws may
cause the lens to crack.
Tighten the screws only until they
are snug.
3RAKE LlGHTKAlLLlGHT
T o change the brake lightltaillight
~ l b , perform the following steps:
. Turn the socket
counterclock-
wise and remove
it.
. Push in the bulb, twist it to the left
and pull it off.
CAUTION
Overtightening the screws may
cause the lens to crack.
Tighten the screws only until they
are snug.