Robin America EH025 Service Manual page 29

Step Parts to remove
Piston and Piston ring
10
Remarks and procedures
1) Remove the two piston clips, take
out the piston pin, and then
remove the piston from the small
end of the connecting rod.
When removing the piston, take
care to prevent dust from getting in
the bearing at the connecting rod
small end.
2) To remove the two piston rings
and the oil ring, open wide the
open end of the rings and remove
them from the piston.
Take care not to widen the open
end of the rings too much, or the
rings may break.
CLIP
PISTON
STEP 10
Fig. 5-25
- 25 -
PISTON RING
PISTON PIN
CLIP
CRANKSHAFT
Fasteners