Table of Contents
Advertisement
INTRODUCTION TO YOUR
NEW CL 50 • CL 50 Ultra
"E" Version VEGETABLE
PREPARATION MACHINE
The CL 50/CL 50 Ultra is perfectly geared to
professional needs. It can perform any number of
tasks, which you will gradually discover as you use it.
This model is equipped with a metal bowl, a
stainless steel motor base for CL 50 Ultra and
polycarbonate bowl for CL 50.
Thanks to its simple design, all components requiring
frequent handling for maintenance or cleaning can
be fitted and removed in a trice.
This manual contains important information designed
to help the user get the most out of this vegetable
preparation machine.
We therefore recommend that you read it carefully
before using your machine. We have also included a
few examples to help you get the feel of your new
machine and appreciate its numerous advantages.
SWITCHING ON
THE MACHINE
Before plugging in, check that your power supply
corresponds to that indicated on the machine's
identification plate.
W A R N I N G
THIS MACHINE MUST BE EARTHED
(RISK OF ELECTROCUTION).
14
• CL 50
/CL 50 Ultra
SINGLE-PHASE
E
E
ROBOT-COUPE CL 50/CL 50 Ultra are fitted with
various types of motors :
230 V / 50 Hz / 1
115 V / 60 Hz / 1
220 V / 60 Hz / 1
The machine comes with a single-phase plug connec-
ted to a power cord.
• CL 50
/CL 50 Ultra
THREE-PHASE
E
E
ROBOT-COUPE CL 50/CL 50 Ultra are fitted with
various types of motors :
400 V / 50 Hz / 3
220 V / 60 Hz / 3
380 V / 60 Hz / 3
The machine is supplied with a cable to which you
simply attach the appropriate electrical plug for
your system. The cable has four wires, one earth
wire, plus three phase wires.
If you have a 4-pin plug :
1) Connect the green and yellow earth wire to the
earth pin.
2) Connect the three other wires to the remaining
pins.
If you have more than 4 pins in the plug please
note the ROBOT-COUPE does not require a neutral
wire.
Switch on the empty machine, making sure that
the blade is rotating properly in an anti-clockwise
direction.
On the motor unit, a red arrow marks the blade
rotation direction. If the blade turns in a clockwise
direction, swap over two wires :
Since GREEN/YELLOW is the earth,
DO NOT DISCONNECT.
Swap either :
the
and the
the
and the
the
and the
1) With the motor base
facing you, place the
discharge plate on the
bottom of the bowl.
Emptying arm for fine grating and
slicing only (cabbage, celery, car-
rots, cheese, etc.).
SIDE A facing upwards (ejection rib
downwards) for any vegetables or
citrus fruit which require careful
handling (tomatoes, mushrooms...).
SIDE B facing upwards (ejection rib
upwards) for all other types of fruit
or vegetables.
2) Position your chosen disc:
a) If you have opted for
a slicing, grating or ju-
lienne disc:
Position the disc on the
motor shaft. To ensure
that it is correctly positio-
ned, turn it in a clockwise
direction.
ASSEMBLY
Hide quick links:
Advertisement
Table of Contents
