Test Mode - Sony TA-VE215 Service Manual

QQ
3 7 63 1515 0
SOFTWARE VERSION DISPLAY MODE
* The software version is displayed.
* Procedure:
While depressing the 5.1CH/SAT and the VIDEO buttons
simultaneously, press the power 1/u button to turn on the main
power. The destination and the software version are displayed.
FLUORESCENT INDICATOR TUBE TEST MODE
* All fluorescent segments are tested. When this test is activated,
all segments turn on at the same time, then each segment turns on
one after another.
* Procedure:
While depressing the 5.1CH/SAT and the + buttons
simultaneously, press the power 1/u button to turn on the main
power.
1. All segments turn on.
TV and AUX LED turn on.
2. Press the VIDEO button, confirm display
VIDEO and DVD LED turn on.
TE
L 13942296513
3. Press the VIDEO button, confirm display
5.1CH/SAT LED turn on.
4. Press the VIDEO button, All segments turn off.
5. Every pressing of the VIDEO button turns on each segment
one after another in the same order.
(Not only the VIDEO button, but also the other buttons sach as
TV , DVD , AUX and 5.1CH/SAT can be used.)
www
.
4
http://www.xiaoyu163.com
SECTION 2

TEST MODE

x ao u163
y
i
http://www.xiaoyu163.com
2 9
8
ALL CLEAR MODE
* All preset contents are cleared when this mode is activated. Use
this mode before returning the product to clients upon completion
of repair.
* Procedure:
While depressing the SET UP button simultaneously, press the
power 1/u button to turn on the main power. Alternatively, press
1/u more than 4S. The message "ALL CLEAR" appears and
initialization is performed.
SURROUND CLEAR MODE
* The preset sound field is cleared when this mode is activated.
Use this mode before returning the product to clients upon
completion of repair.
* Procedure:
While depressing the SOUND FIELD MODE button, press the
power 1/u button to turn on the main power. The message
"SUR CLR" appears and initialization is performed.
Q Q
3 6 7 1 3 1 5
co
.
9 4 2 8
0 5 8 2 9 9 4 2 8
m
9 9
9 9