8.5.7.
POWER Board
1. Remove the FAN. (See 8.5.4.)
2. Remove the Power Box. (See 8.5.6.)
3. Remove the 5 screws(a) and screw that fasten the
Power Box Cover to the Power Box.
4. Remove the AC Inlet.
5. Remove the clamper.
6. Remove the connector.
7. Remove the 5 screws.
8. Remove the screw(E).
9. Remove the POWER Board.
8.5.8.
Ionizer Board
1. Remove the Power Box. (See 8.5.6.)
2. Remove the 2 screws.
3. Disconnect the 2 connectors to release the Ionizer Board's
unit from the scanner.
74