Physical Specifications - NAD 312 Specifications

Specifications - NAD 312
Continuous average power output into 8
(Min power per channel, 20Hz - 20kHz both channels driven with no more than rated distortion)
Rated distortion
(THD 20Hz - 20kHz)
Clipping power
(max continuous power per channel)
IHF dynamic headroom at 8
IHF dynamic power
Damping factor
(ref. 8 50Hz)
Frequency response
THD
(20Hz - 20kHz, from 250mW to rated power)
Input impedance
(R and C)
Input sensitivity
(ref. rated power)
Signal to noise ratio
Signal to noise ratio Phono
Frequency response
Preamp output impedance
Tape output impedance
Headphones output impedance
Treble control
Bass control

Physical specifications

Dimensions (W x H x D)
Net weight
Shipping weight
Power consumption
NOTE: NAD reserves the right to change specifications or design at any time without notice. All specifications are those in effect at time of printing.
(max short term power per channel)
(A weighted)
(A weighted, with cartridge)
(20Hz - 20kHz)
25W (14dBW)
0.03%
40W
3dB
8 50W (17.0dBW)
4 60W (17.8dBW)
2 75W (18.7dBW)
>60
20Hz - 20kHz ±0.3dB
3Hz/70kHz -3dB
<0.03%
Line inputs 20k /500pF
Phono input 47k /200pF
Line inputs 165mV
Phono input 2.7mV
90dB ref. 1W
104dB ref. rated power
77dB ref 5mV
±0.5dB
220
Source Z + 2k
220
±7dB at 10kHz
±10dB at 50Hz
435 x 95 x 285mm
6kg
7.5kg
160W