Connecting Wireless Lan - Denon RCD-N7 Owner's Manual

n Proxy Settings
Make this setting when connecting to the Internet wia to proxy
server.
Press .
[MENU]
1
Turns on the Menu settings mode and the Menu appears on
the display. (vpage 25 "Menu map")
ui
2 Use to select "Network" – "Connection" –
"Proxy", then press ,
[ENTER] < 1
"Proxy" setting menu appears.
If "Proxy(On)" appears, go to step 5.
3
If "Proxy(Off)" appears, press
p
, or .
ENTER>
"Proxy" (On/Off) setting menu appears.
Use ui to select "On", then press
4
p
or .
ENTER>
"Proxy" setting menu appears.
Use ui to select "Proxy (Address)" or "Proxy
5
(Name)", then press , 1
[ENTER] <
"Select Type" setting menu appears.
• Seleccione si Proxy es una dirección de servidor o un nombre de
dominio.
ui
6 Use to select "Address" or "Name", then
press , or
[ENTER] < 1 / 3 ENTER>
"Proxy" setting menu appears.
ui
7 Use to select "Address" or "Name", then press
, or p .
[ENTER] < 1 / 3 ENTER>
"Address" or "Name" input menu appears.
• Input a server address or domain name.
uip
Use or
8 [NUMBER] (0 – 9)
or name, then press [ENTER] or
"Proxy" setting menu appears.
ui
Use to select "Port", then press
9
p
ENTER> or .
"Port" input menu appears.
Use ui p or
10 [NUMBER] (0 – 9)
then press [ENTER] or < 1 / 3 ENTER>
The Proxy settings are completed.

Connecting Wireless LAN

If you cancelled "Network First Setup" or changed the network
environment, perform "Menu" − "Network" − "Network First Setup".
n Search Access Point (Wireless LAN)
Fitting a rod antenna.
1
If a LAN cable is connected, remove it.
or p .
/ 3 ENTER>
Turn on this unit.
2
(vpage 11 "Turning the power on")
Press [MENU]
, 3
[ENTER] < 1 / 3
Turns on the menu settings mode and the menu appears on
the display. (vpage 25 "Menu map")
ui
4 Use
,
[ENTER] < 1 / 3
"Search Access Point", then press
or
ENTER>
The access point you have set is displayed.
p
3 or .
/ ENTER> ui
5 Use
,
[ENTER]
If the access point is not detected automatically, use the
"Manual Settings" (vpage 30) procedure.
If there is an encryption setting for the access point
6
you selected in step 5, enter same encryption key as
p .
used for the access point. (If there is no encryption
setting, proceed to step 7.)
Use uio p to input the "Key" (encryption key) and press
[ENTER] <
,
as used for the access point.
• The types of characters that can be input are as shown below.
G Upper case charactersH
to input the address
ABCDEFGHIJKLMNOPQRSTUVWXYZ
< 1 / 3 ENTER> .
GLower case charactersH
abcdefghijklmnopqrstuvwxyz
GSymbolsH
, 1 3
[ENTER] < / ! " # $ % & ' ( ) z + , - . / : ; < = > ? @ [ \ ] ^ _ ` { | }
GNumbersH 0123456789 (Space)
• When no security settings have been used in the Internet connection
settings, this step is not necessary.
to input the port,
.
.
to select "Network" – "Connection" –
,
[ENTER] <
p
.
to select the access point, and then press
p
1 3 or .
< / ENTER>
1 / 3 ENTER> or p. Enter the same encryption key
Use i to select "Connection", then press
7
p
1 3 or .
< / ENTER>
Network connection starts.
• This unit performs automatic network setup due to the DHCP
function.
• When connecting to a network that has no DHCP function, perform
the setting in Network conntecting (DHCP=Off) (vpage 28).
n WPS Settings (Push-button method)
Press .
[MENU]
1
Turns on the Menu settings mode and the Menu appears on
the display. (vpage 25 "Menu map")
ui
2 Use to select "Network" – "Connection" –
"WPS" – "Push Button", then press
1 / 3
p
or .
ENTER>
Use ui to select "Enter", then press
3
p
1 3 or .
< / ENTER>
Please push the WPS button of the router, and push the Enter
button of the machine.
When connection is established with access point,
4
"Succeeded" is displayed.
n WPS Settings (PIN code method)
Press .
[MENU]
1
Turns on the Menu settings mode and the Menu appears on
the display. (vpage 25 "Menu map")
ui
Use to select "Network" – "Connection" –
2
"WPS" – "PIN code", then press
p
or .
ENTER>
The access point you have set is displayed.
ui
3 Use to select the access point, then press
˜
,
[ENTER] < 1 / 3 ENTER>
PIN code number is displayed.
Set this PIN code to the register.
4
When connection is established
"Succeeded" is displayed.
ENGLISH
Setting the network [Network]
,
[ENTER]
,
[ENTER] < 1 / 3
,
[ENTER]
,
[ENTER] < 1 / 3
, or p .
with access point,
29