Body Panels - BMW C 650 GT Rider's Manual

Disconnect negative lead 1
8
first.
Then disconnect positive
102
lead 2.
Remove screw 3 and remove
the retainer.
Remove the battery from the
holder.
Installing battery
Position the battery in the bat-
tery compartment with the
positive terminal on the left
z side.
Slip the battery retainer over
the battery and install screw 3.
Installation in the wrong
sequence increases the risk
of short-circuits.
Always proceed in the correct
sequence.
Connect positive lead 2 first.
Then connect negative lead 1.
Install the side panel (
Setting date and time (

Body panels

Removing side panel
Remove screw 1.
http://www.motorcycle.in.th
The procedure for the right
side panel is described
here, but the description ap-
plies by analogy to the left side
panel.
103).
39).
Remove screws 2.
Open stowage compartment 3.