NAD 2400 Specification Sheet page 2

POWER AMP SECTION
Continuous output power into 8Ω *
Rated distortion
(THD 20Hz - 20kHz)
Clipping power
(maximum continuous power per channel)
IHF Dynamic headroom at 8Ω
IHF dynamic power
(maximum short term power per channel)
Damping factor
(ref. 8Ω, 50Hz)
Input impedance
Input sensitivity
(for rated power into 8Ω)
Frequency response
Signal/noise ratio
THD
(20Hz - 20kHz)
Bridged Mode
Continuous output power into 8Ω *
IHF Dynamic headroom at 8Ω
IHF dynamic power
(maximum short term power per channel)
PHYSICAL SPECIFICATIONS
Dimensions
(W x H x D)
Net weight
Shipping weight
Power consumption
(120 ~ 240V, 50/60Hz)
* Minimum power per chnnel, 20Hz - 20kHz, both channels driven with no more than rated distiortion.
Dimensions are of unit's cabinet without attached feet; add up to 18mm for total height.
Dimension depth excludes terminals, sockets, controls and buttons.
© NAD Electronics. All rights reserved. E & OE
100W (20dBW)
0.03%
130W
+5.7dB
8Ω 370W (25.7dBW)
4Ω 400W (26dBW)
2Ω 440W (26.4dBW)
>100
20kΩ / 600pF
1V
3Hz - 100kHz / +0, -3dBdB
ref. 1W 98dB
ref. rated power 118dB
<0.03%
200W (23dBW)
+6dB
8Ω 800W (29dBW)
4Ω 880W (29.4dBW)
435 x 127 x 385mm
10kg
12kg
390VA