Using Fm Traffic; Led Blink Codes - Garmin Nuvi 700 Series Owner's Manual

To power
connector on
nOvi cradle
USING
FM
TRAFFIC
USING
FM
TRAFFIC
The traffic receiver is included in some
niivi 710, 750T, 760, and 770 packages.
Use an FM TMC (Tramc Message
.....
Channel) traffic receiver to receive
traffic information broadcast over the
FM Radio Data Svstem. For information
.-
about FM traffic receivers and coverage
areas, see www.garmin.com/traffk.
NOTE:
Garmin is not responsible
for the accuracy of the tratfic
information. The FM traffle
receiver simply receives signals
from the traffic service provider
and shows that information on
your nlivi.
NOTE:
The FM traffic receiver
and nlivi must be in data range of
an FM station transmitting TMC
data to receive traffic information.
..
_.
...
_--_._
..
_-
NOTE:
You can only access the
traffic information if the nUvi
is connected to an FM traffic
recelvcr.
NOTE:
If your FM TMC tratfic
receiver has an antenna with
suction cups on it route the
antenna on vour windshield
.-
vertically using the suction cups.
LED Blink Codes
The green Power LED lights when
connected to external power. The Status
LED indicates the signal reception:
• Yellow dot-dash flashes:
determining which country you
are currently in.