Operation Of The T562 With The Remote Control - NAD T562 Owner's Manual

1 The power buttons labeled POWER ON and POWER OFF will toggle the T562 from standby to ON
position, only if the power button on the left front of the T562 is in the ON (depressed) state.
2 The SETUP button is used in conjunction with the television monitor's On Screen Display (OSD)
connected to the T562, (see the section on 'Initial Set-up Settings') to edit the DVD's drop-down-menu
OSD.
3 There are ten transport control buttons that allows one to directly control the DVD/VCD/CD media.
These buttons handle the basic operations of OPEN/CLOSE the media tray, STOP, PAUSE, STEP, PLAY,
SKIP tracks, SCAN tracks, and SLOW scan tracks.
4 The navigation buttons
OSD, title and menu screens.
5 The RETURN button is used for backup navigation of various DVD and SETUP menus.
6 The TITLE and MENU buttons are used to display via OSD, the title headings and menus of the DVD
and MP3 CD media when available.
7 The DISPLAY button will show an OSD for advanced DVD/VCD/CD player configuration, when the
T562 is in play or pause mode.
8 The CLEAR button is used to clear OSD values and menus.
9 The PROGRAM, CHECK, buttons are used for programming the tracks on CD media.
10 The REPEAT button when pressed once, repeats an audio CD track or DVD chapter. If the button is
pressed twice the entire audio CD is repeated or the DVD chapters are repeated.
11 The REPEAT A-B button is used to repeat a specific start to stop section of an audio CD or DVD/VCD.
During play mode of the media, press the button once to store the start point of the T562 in memory.
When pressed a second time the stop point of the media is stored. The T562 will play the selected
section(s) until REPEAT A-B button is pressed.
12 The PROG.SCAN button will allow one to toggle from interlace-scan to progressive-scan video.
13 The AUDIO button will allow one to switch the audio language of the DVD media only if the DVD
media supports the AUDIO button feature.
14 The SUBTITLE button will allow one to switch on or off the various types of subtitles for the DVD media
being viewed, only if the DVD media supports the SUBTITLE button feature.
15 The ANGLE button will allow one to select various viewing angles of each movie scene only if the DVD
media supports this feature.
16 The number buttons are used for inputting numeric values when navigating the menu, title, and
display OSDs or when directly selecting media tracks.
17 The DIMMER button allows the user to conveniently dim the T562 font display. Each press of the
DIMMER button will change the dimness one level for a total of 3 levels then to maximum brightness.
The brightness will revert to 100% when power is cycled.
18 The MARKER and SEARCH buttons allows one to set up to 9 bookmarks on a DVD, VCD and CD for
quick reference. After each marker is stored one then presses the SEARCH then navigation buttons to
play the bookmark.
19 The ZOOM button allows one to expand the viewed image up to 32 times. To clear the zoom menu,
press the CLEAR button.
20 The RANDOM button allows one to randomly play audio CD media. In conjunction with the REPEAT
buttons the audio CD would randomly play all tracks on an audio CD. This feature is not available on
most DVD/VCDs.

OPERATION OF THE T562 WITH THE REMOTE CONTROL

in conjunction with the ENTER button allows one to navigate the
Identification of Controls
9