Samsung SCV-6083R User Manual page 27

e.
o
n
- FONT COLOR : You can change the OSD font color. (White, Yellow, Green, Red, Blue)
- LANGUAGE : You can select the menu language according to your requirements.
- RETURN : Return to the SPECIAL menu.
COMM ADJ (Communication Adjustment) :
- COAX : You can select whether to
use COAX communication.
- RETURN : Return to the SPECIAL
menu.
IMAGE ADJ
❶
If the SPECIAL menu screen is
displayed, use the Function Setup
switch so that the arrow indicates
'IMAGE ADJ'.
❷
Select a desired mode using the
Function Setup switch.
- GAMMA :
The setting range is 0.35~1.0 .
The closer to 1.0 the setting is, the
darker it gets. default value is User,
User is the optimum setting.
- PED LEVEL : The setting range is 1 ~ 100. The closer to 100 the setting is, the higher
the PED level gets.
- COLOR GAIN : The setting range is 1 ~ 100. The smaller the setting value is the
smaller the color gain gets and the more color blind it gets.
- H-REV : Flip an image horizontally.
- V-REV : Flip an image vertically.
- SHARPNESS : Select a mode to adjust the thickness of an image's sharpness.
Depending on the image, adjust it to an appropriate value.
OFF : Released state
ON : The setting range is 1 ~ 32.
-
RETURN : Return to the SPECIAL menu.
M

When the V-REV or H-REV mode is enabled, the text on the screen does not flip.

If you increase the SHARPNESS level too high, the picture may become distorted or noise may appear.
COMM SETUP
1. COAX
2. RETURN
IMAGE SETUP
GAMMA USER
1.
I
PED LEVEL
2.
3. COLOR GAIN IIIIIIIIII
4. H-REV OFF
5. V-REV OFF
6. SHARPNESS ON
RETURN
7.
ON
IIIIIIIIIIIIIIIIIIII 1
I
IIIIIIIIII 50
English_27