Samsung RSA1W Series User Manual page 5

safety information
sited depends on the amount of refrigerant used.
• Never start up an appliance showing any signs of
damage. If in doubt, consult your dealer.
• The room must be 1m
R600a refrigerant inside the appliance.
• The amount of refrigerant in your particular
appliance is shown on the identification plate inside
the appliance.
• Please dispose of the packaging material for this
product in an environmentally friendly manner.
• Pull the power plug out of the socket before
changing the interior light of the refrigerator.
- Otherwise, there is a risk of electric shock.
SEVERE WARNING SIGNS
• Do not install the refrigerator in a damp place or
WARNING
place where it may come in contact with water.
- Deteriorated insulation of electrical parts may
cause an electric shock or fire.
• Do not place this refrigerator in direct sunlight or expose
to the heat from stoves, room heaters or other appliance.
• Allow sufficient space to install the refrigerator on a flat
surface.
- If your refrigerator is not level, the internal cooling
system may not work correctly.
• Do not plug several appliances into the same multiple
power board. The refrigerator should always be plugged
into its own individual electrical which has a voltage
rating that matched the rating plate. This provides the
best performance and also prevents overloading house
wiring circuits, which could cause a fire hazard from
3
in size for every 8g of
safety information _5