Bad Boy MZ 42 Owner's, Service & Parts Manual page 31

(4) Ensure the belt is on every pulley and
then place the belt on the bolt of the
pulley on the left side and place
pressure on it and roll the pulley to
allow the belt to fall into place.
(5) Check to make sure the belt is on all
the pulleys and matches the belt routing
sticker.
(6) Place the pulley covers back onto the
deck.
Leveling the Deck:
(1) Start on a flat l e vel surface.
(2) Set the air pressure in all four tires to 12 psi.
(3) Raise the deck up, and measure all four corners
of the deck to see if it is level from left to right and
front to back. All decks should be level from left
to right and have a 1/8˝ pitch down in the front.
(4) Adjust deck to ensure deck is level from left to
right and has a 1/8" downward pitch from the
back of the deck to the front.
PAGE 31