Honda 2004 Pilot Reference Owner's Manual page 38

Main Menu
Table of Contents
Installing a Child Seat
RIGID TYPE
3. Place the child seat on the vehicle
seat, and attach the seat to the
lower anchors according to the
child seat maker's instructions.
Some LATCH-compatible seats
have a rigid-type connection as
shown above.
34
Driver and Passenger Safety
FLEXIBLE TYPE
Other LATCH-compatible seats have
a flexible-type connection as shown
above.
4. Whatever type you have, follow
the child seat maker's instructions
for adjusting or tightening the fit.
I n f o r ma t i o n P r o v i d e d b y :
5. Attach the tether strap hook to the
tether anchorage point on the
underside of the seat cushion,
then tighten the strap as
instructed by the child seat maker.
Make sure the strap is not twisted.
6. Push and pull the child seat
forward and from side-to-side to
verify that it is secure.