Honda 2004 Pilot Reference Owner's Manual page 186

Table of Contents
Main Menu
Lights
Replacing Rear Bulbs
1. Open the tailgate.
2. Remove the two screws, then pull
the rear light assembly straight
back to remove it from the body.
3. Remove the socket of the burned
out bulb by turning it one-quarter
turn counterclockwise, and pull it
straight out of its socket.
182
Maintenance
4. Install a new bulb into the socket
and reinstall the socket into the
light assembly.
I n f o r ma t i o n P r o v i d e d b y :
Replacing the High-mount Brake
Light
SCREW
1. Place a cloth on the middle edge
of a part of the lens on the
passenger's side. Remove a part of
the lens by carefully prying on its
edge with a small flip tipped
screwdriver.
2. Use a Phillips-head screwdriver to
remove the screw under the lens.