Light Bulb Replacement - Suzuki dl650a Owner's Manual

LIGHT BULB REPLACEMENT

The wattage rating of each bulb is
shown on the table below. When
replacing a burned out bulb, always
use the exact same wattage rating.
Using other than the specified rating
can result in overloading the electrical
system or premature failure of a bulb.
NOTICE
Failure to use a light bulb with the
correct wattage rating can over-
load the electrical system of your
motorcycle or cause the bulb to
burn out sooner.
Use only the light bulbs shown in
the chart as replacement bulbs.
Headlight
Position light
Turn signal light
Brake light/Taillight
License plate light
12V 60/55W (H4) × 2
12V 5W × 2
12V 21W
12V 21/5W
12V 5W
HEADLIGHT/POSITION LIGHT
To replace the headlight bulb and
position light bulb, perform the follow-
ing step:
To remove the instrument panel
assembly:
1. Remove the bolts and fasteners.
2. Push the instrument panel cover
at the circled place with thumb
and roll up the cover to unhook
the hook.
6-48