Parameter Input Example - Pfaff 3734-12 Instruction Manual

12

Parameter input example

.06.02
Switch on the machine
2x
Select input mode by pressing TE/Speed key twice.
No
Select parameter group "500" by pressing the corresponding +/- key. . . . .
Confirm selection by pressing the corresponding +/- key.
Enter the code number, see Chapter 9.08 Entering/changing the code number.
Select the desired parameter, e.g. "501" by pressing the corresponding +/- key. . . . .
No
Set the desired parameter value by pressing the corresponding +/- key. . . . .
VAL
By pressing the TE/speed key, the value is taken over and the machine changes to the
sewing mode.
TE
No VAL
101 II
TE
No
500
TE
No VAL
501 3500
Adjustment
12 - 30