Protecting The Environment - Black & Decker EPC126 Original Instructions Manual

ENGLISH
♦ Regularly clean the motor housing using
a damp cloth. Do not use any abrasive or
solvent-based cleaner.
♦ Regularly open the chuck and tap it to remove
any dust from the interior.

Protecting the environment

Separate collection. This product must
not be disposed of with normal household
waste.
Should you fi nd one day that your Black & Decker
product needs replacement, or if it is of no further
use to you, do not dispose of it with household
waste. Make this product available for separate
collection.
Separate collection of used products and
packaging allows materials to be recycled
and used again. Re-use of recycled
materials helps prevent environmental
pollution and reduces the demand for raw
materials.
Local regulations may provide for separate
collection of electrical products from the
household, at municipal waste sites or by the
retailer when you purchase a new product.
Black & Decker provides a facility for the collection
and recycling of Black & Decker products once
they have reached the end of their working life. To
take advantage of this service please return your
product to any authorised repair agent who will
collect them on our behalf.
You can check the location of your nearest
authorised repair agent by contacting your local
Black & Decker offi ce at the address indicated
in this manual. Alternatively, a list of authorised
Black & Decker repair agents and full details of our
after-sales service and contacts are available on
the Internet at: www.2helpU.com
Batteries
Black & Decker batteries can be recharged
many times. At the end of their useful life,
discard batteries with due care for our
environment:
♦ Run the battery down completely, then remove
it from the tool.
♦ NiCd, NiMH and Li-Ion batteries are recyclable.
Take them to any authorised repair agent or
a local recycling station.
10
Technical data
EPC126 (H1) EPC146 (H1) EPC186 (H1)
Voltage V 12
DC
-1
No-load speed min 0-450/
0-1,400
Max. torque Nm 18
Chuck capacity mm 10
Max. drilling capacity
Steel/Wood mm 10/25
Battery A12/A12E
Capacity Ah 1.2
Type NiCd
Weight kg 0.5
Battery A12NH
Capacity Ah 1.5
Type NiMH
Weight kg 0.6
Charger
90500843
90500847
90500855
90500858
Input voltage V 230-240
AC
Output voltage V 14.5-15.3
DC
Current mA 210-220
Approx. charging time h 8-10
EPC128 (H1) EPC148 (H1) EPC188 (H1)
Voltage V 12
DC
-1
No-load speed min 0-450/
0-1,400
Max. torque Nm 18
Chuck capacity mm 10
Max. drilling capacity
Steel/Wood mm 10/25
Masonry mm 10
Battery A12/A12E
Capacity Ah 1.2
Type NiCd
Weight kg 0.5
Battery A12NH
Capacity Ah 1.5
Type NiMH
Weight kg 0.6
14.4 18
0-450/ 0-400/
0-1,500 0-1,350
20 25
10 10
10/25 10/25
A14/A14E A18/A18E
1.2 1.2
NiCd NiCd
0.6 0.7
A14NH A18NH
1.5 1.5
NiMH NiMH
0.7 0.9
90500844 90500845
90500848 90500849
90500856 90500857
90500859 90500860
230-240 230-240
17.4-18.2 21.75-22.6
200-210 210-230
8-10 8-10
14.4 18
0-450/ 0-400/
0-1,500 0-1,350
22 25
10 10
10/25 10/25
10 10
A14/A14E A18/A18E
1.2 1.2
NiCd NiCd
0.6 0.7
A14NH A18NH
1.5 1.5
NiMH NiMH
0.7 0.9