Utax 5240L User Manual page 228

Auto Error Clear
If an error occurs during printing, the print job stops to wait for the next step to be taken by the user. In the Auto Error
Clear mode, automatically clear the error after a set amount of time elapses.
The following errors are automatically cleared.
Cannot duplex print on this paper.
Send error.
Cannot connect to Authentication Server.
Incorrect account ID. Job is canceled.
Job Accounting restriction exceeded. Cannot print.
Job Accounting restriction exceeded. Cannot scan.
Job not stored. Press [OK].
Job Accounting restriction exceeded. Job is canceled.
Polling box limit exceeded. Job is canceled.
Memory is full. Print job cannot be processed completely.
Maximum Number of scanned pages. Job is canceled.
Print overrun. Job is paused.
KPDL error. Job is canceled.
USB memory error. Job is canceled.
No multi copies. Press [OK].
• Auto Error Clear ON/OFF
Select whether to use Auto Error Clear or not.
Use the procedure below to specify the auto error clear setting.
Sys. Menu/Count.: a b
3
System
4
User/Job Account
5
Common Settings
*********************
Common Settings: a b
1
********************* Language
2
Default Screen
3
Sound
Login User Name:
*******************
Login Password:
1
[ Exit ]
2
[ Exit ]
3
L b
[ Login ]
8-32
In the Sys. Menu/Count. menu, press the
select [Common Settings].
Press the OK key. The Common Settings menu appears.
Press the or key to select [Timer Setting], and press
the OK key.
A login screen will appear. Then, enter the user ID and
password with administrator privileges to log in, and
press [Login] (the Right Select key).
Default Setting (System Menu)
or key to