Denon dvd-900 Service Manual page 16

QQ
3 7 63 1515 0
FLOW CHART NO.13
PON 1.8V is not outputted.
Is 2.5V voltage supplied at pin(1) of IC1002?
Is the "H" pulse inputted into pin(4) of IC1002?
Replace IC1002.
FLOW CHART NO.14
The disc tray cannot be opened and closed.
(It can be done using the remote control unit.)
Is 0V voltage supplied to Pin(9) of IC2001 when
the OPEN/CLOSE button is activated on the DVD?
See FLOW CHART NO. 15. <The disc tray cannot be opened and closed.>
FLOW CHART NO.15
TE
L 13942296513
The disc tray cannot be opened and closed.
Replace the DVD Main CBA Unit.
No improvement can be found.
Replace the DVD Mecha.
FLOW CHART NO.16
[No Disc] is indicated. (When the focus error occur.)
Replace the DVD Main CBA Unit.
No improvement can be found.
Replace the DVD Mecha.
www
.
http://www.xiaoyu163.com
Yes
Yes
Yes
Yes
Yes
x ao u163
y
i
http://www.xiaoyu163.com
2 9
8
No
Check D1013, C1014 and the periphery circuit.
No
Check PWRCON line.
No
Check the SW2208 and OPEN/CLOSE button.
Q Q
3 6 7 1 3 1 5
No
The malfunction of the original DVD Main CBA Unit.
No
The malfunction of the original DVD Main CBA Unit.
co
.
- 16 -
9 4 2 8
0 5 8 2 9 9 4 2 8
m
9 9
9 9