Power Saving Mode; Sharing Data Stored On The Microsd Card - TrekStor Portable WLAN HotSpot Operating Instructions Manual

Accessing the Web Management Page
a) Make sure that the connection between the Portable WLAN HotSpot and the client is OK.
b) Start the internet browser and enter http://192.168.1.1 in the address bar.
c) Enter the password, and then click Login.
The default password is admin.
i
Verifying the PIN code
When the PIN code protection is enabled, you need launch the web management page and
then enter the correct PIN code as prompted. Both the PIN and PUK are delivered with the SIM
card. For details, consult your service provider.

Sharing data stored on the microSD card

After the microSD card is inserted, you can store data on the card or share the data stored on the card
on the "Web management" page.
a) Insert the microSD card.
b) Access the "Web management" page.
Click SD Card to manage the data stored on the microSD card.
c)
SMS
You can enjoy the short message (SMS) service on the "Web management" page.
a) Access the "Web management" page.
Click SMS to view, create, reply, or send a message.
b)
Daily Use

Power saving mode

If no operation is performed on the Portable WLAN HotSpot for a while, the screen is
automatically switched off. If the Portable WLAN HotSpot has not been accessed for 30 minutes
by default, the Portable WLAN HotSpot changes to the deep sleep state.
When the Portable WLAN HotSpot is in the deep sleep state, you can press any key
to activate the Wi-Fi function. If the Portable WLAN HotSpot is activated, the screen
becomes lightened.
EN
17