Watching Hdcp 2.2 Copyright-Protected - Sony STR-DH770 Manual

Hide thumbs Also See for STR-DH770:
Table of Contents

Advertisement

Press AMP MENU.
1
Select [<HDMI>] - [CTRL HDMI] on the display panel.
2
3
Select [CTRL ON].
If you connect to a TV that is not compatible with the Audio Return Channel
(ARC) function or you want to select an audio signal using a cable other than
an HDMI cable (e.g. via an optical digital cable or an audio cable)
Switch the audio input mode. For details, "Switching between digital and analog audio (INPUT
MODE)."
Note
ARC function may work on other devices than those manufactured by Sony. However, operation is
not guaranteed.
Be sure to turn off the volume of the TV or activate the muting function of the TV.
If your TV does not support the System Audio Control function, press AMP MENU, then set
[<HDMI>] - [AUDIO OUT] to [TV+AMP] on the display panel to output the sound of the TV from the
TV speaker and the speakers connected to the receiver.
[46] Enjoying Video and Sound
Watching HDCP 2.2 copyright-protected content
To watch HDCP 2.2 copyright-protected content such as 4K content, connect the receiver and
TV via an HDCP 2.2-compatible HDMI jack. You can only view copyright-protected 4K content
through the HDCP 2.2-compatible HDMI jack connection. For details on whether the TV and 4K
devices are equipped with an HDCP 2.2-compatible HDMI jack, refer to the operating
instructions of the TV and 4K devices.
[47] Enjoying Video and Sound
Enjoying audio content using the BLUETOOTH
function (Pairing operation)
Pairing is an operation where BLUETOOTH devices are registered to each other before
connection. Once a pairing operation is performed, it does not need to be performed again.
1
Place the BLUETOOTH device within 1 meter (3.3 feet) of the receiver.
Press BLUETOOTH on the remote control to select the BLUETOOTH function.
2
Press
PAIRING to activate the pairing mode of the receiver.
3
[PAIRING] appears and [BT] flashes quickly on the display panel. Perform step 4 within
five minutes, otherwise pairing will be canceled. In this case, repeat this step.
Playing AV devices
Playing content from an iPhone/iPod

Advertisement

Table of Contents
loading

Table of Contents