Advertisement
This white paper explains how to connect a Kenwood KCA-
RC55MR to a compatible receiver.
Step 1: Press [SRC] and select [STANDBY] by using the [Control]
knob and then Press [Control] to enter function setting mode.
Step 2: Select [Initial Settings] then [Remote
Settings] then [Remote ID Set] using the [Control] knob.
A remote control ID list is displayed. "Yes" indicates that this ID is
already registered. "No" indicates that this ID is available.
Step 3: Press [Control] knob on desired ID.
"Registering..." appears.
Registering...
Advertisement
