Table of Contents
Advertisement
Power.on/off
Using the [POWER] switch on the right side pan-
el, you can turn on or off the unit .
HOLD
REMOTE
POWER
OUTPUT
PHONES
While the unit is off, sliding the switch in
the arrow ( ) direction turns on the unit af-
ter one second and the screen as shown
below appears .
Fostex
DC-R302
If an SD card is inserted to the [SD CARD] slot,
the unit reads the card and the screen as shown
below appears .
+ Card: Loaded +
+
If the card contains one or more audio files, the
unit reads a file, while the level meter screen as
shown below appears .
To turn off the unit, slide the [POWER] switch in
the arrow ( ) direction and hold it for two seconds .
<Memo>: During playback and recording, you can-
not turn on the unit .
Basic.operations
USB
DC-IN
9-24V
LEFT
RIGHT
SD
RTN IN
+
Internal.realtime.clock.setting
When you turn on the unit for the first time after
purchasing it, the screen as shown below ap-
pears .
The year digit flashes and you can set the year
value .
M> RTC SETUP
> 2012y03m29d
1 . Set the year value using the [-/DOWN] and [+/
UP] keys .
2 . After you set the year value, press the [ENTER]
key .
The month digit now flashes and you can set
the month value .
3 . Set the month value using the [-/DOWN] and [+/
UP] keys, and press the [ENTER] key .
In this manner, you can also set values of other
digits .
Each press of the [ENTER] key moves the
flashing digit in the following order .
"year -> month -> day -> hour -> minute ->
second -> year -> . . . . . ." .
4 . After setting all values, press the [EXIT] key .
The realtime clock setting is completed and the
display shows the internal clock time .
5 . Press the [EXIT] key again .
The display returns to the normal screen .
●.Backup.battery.for.the.realtime.clock
The unit uses the rechargeable button battery for
backing up the internal realtime clock . This bat-
tery is charged when the unit is on, while it backs
up the internal realtime clock when the unit is
off . Therefore, if the unit is not used for a long
time, the realtime clock may be reset . (The fully-
charged button battery can back up the realtime
clock for approximately five months .) In such a
case, turn on the unit for some hours to charge
the button battery so that it can back up the
clock .
You can record audio even if the internal realtime
clock is reset, however, the date/time information
of the audio file created is not correct .
10
Advertisement
Table of Contents
