Maintenance - DeWalt DWP849X Original Instructions Manual

Maintenance

Your D WALT power tool has been designed to
E
operate over a long period of time with a minimum
of maintenance. Continuous satisfactory operation
depends upon proper tool care and regular cleaning.
WARNING:
Cleaning
WARNING:
WARNING:
Lubrication
D WALT tools are properly lubricated at the factory
E
and are ready for use. Tools should be relubricated
regularly every sixty days to six months, depending
on usage. (Tools used constantly on production or
heavy-duty jobs and tools exposed to heat may
require more frequent lubrication.) This lubrication
should only be attempted by trained power tool
repairpersons such as those at DEWALT service
centers or other authorized service locations.
Motor Brushes
Be sure tool is unplugged before inspecting brushes.
Carbon brushes should be regularly inspected for
wear. To inspect brushes, unscrew the plastic brush
inspection caps (located in the sides of the motor
housing) and the spring and brush assemblies may
be withdrawn from the tool. Keep brushes clean and
sliding freely in their guides.
CAUTION:
ACCESSORIES
WARNING:
Recommended accessories for use with your tool
are available at extra cost from your local dealer or
authorized service center. If you need assistance
in locating any accessory, please contact local
DEWALT sales.
Use only accessories having a maximum operating
speed at least as high as the highest "RATED RPM"
marked on the tool's nameplate. This precaution
applies to any accessory on any tool.
Change Super Flexible Rubber Backing Pad
(includes clamp washer)
Repairs
To assure product SAFETY and RELIABILITY,
repairs, maintenance and adjustments (including
brush inspection and replacement) should be
performed by a DEWALT factory service center, a
D WALT authorized service center or other qualified
E
service personnel. Always use identical replacement
parts.
ENGLI SH
11